|
View and/or Shop
by clicking on Product line below:
MicroVeneers®
Pure Raw Shell Veneer (0.15mm thick)
Laser
Cutting
Services
We will cut your whole 5"x9" Sheets for as low as $50 and
matching inlay cavities for $25
Grand Opening Special
Micralone®
MicroVeneer®
with Opaque Backing
and Clear Coat Gloss(0.20mm thick).
Also called ThinLams
Top-Strat®
MicroVeneer®
mount on a Composite
Back
(0.05" thick). Standard block inlay
thickness.Unique Copyrighted Product.
NacreLite®
MicroVeneer®
that can be made in any
thick in 0.15mm increments.
Lamalone®
MicroVeneer®
embedded in Organic
Polymer similar to Aba Lam and Shell
LAMs
Available thicknesses:
0.40", 0.05", 0.06", 0.08" & 0.1"
Laser
Cutting
Services
We will cut your whole 5"x9" Sheets for as low as $50 and
matching inlay cavities for $25
Grand Opening
Special
Scratch & Dent
Broken, chipped and defective items
Shipping Options
Not all items can be shipped using Overnight or Express Mail
Ship Overseas
Oversea Buyer Must add this to their order
Instructions
How to cut, shape, dye, glue and mount
and wrap our products
FAQ's
Commonly asked Questions
UnderLay by CNG©
Scrip and etching our
MicroVeneer©
just like block shell
Possible Uses
What can these Products can be used for
Wrapping
on
Fishing Rods
&
Pool Cues
How to "Wrap" our MicroVeneers©
onto
Fishing Rods and Pool Cues, etc
Laser
Cutting
Services
We will cut your whole 5"x9" Sheets for as low as $50 and
matching inlay cavities for $25
Grand Opening
Special
All
the following terms are the sole property of InlayUSA.com
King
Abalone™
Prince
of
Pearl™
The
Abby
of
Awabi™
The
Sultan
of
Shell™
The
Mother
of all
Pearl
™
Vicker
of
Veneer™
Prince
of
Paua™
The
Mother
of all
Inlay™
Queen
Awabi™
The
King
Tut of
Tahitian™
| |
Awabi Oyster
Lamalone®
Made in U.S.A.
$50.00
Includes Shipping & Insurance (U.S. Buyers Only)
Actual Size is 5 inches by 9 inches at 0.05" (or 1.3mm) thickness
$40.00 each
5"x9"at 0.04" (or 1mm) thickness
$60.00 each
5"x9"at 0.06" (or 1.5mm) thickness
$70.00 each
5"x9"at 0.08" (or 2mm) thickness
$90.00 each
5"x9"at 0.1" (or 2.5mm)
thickness
Please note: Thicknesses are minimums and can up to 10%
thicker BUT will not be less then the stated thickness.
ALL PRICES INCLUDE FREE SHIPPING TO
U.S. ADDRESSES
ALL Overseas Buyers MUST ADD Shipping Options:
International
Orders
Lamalone®
is a similar product to Aba Lam and Shell "Lams." That is, it is a sheet of
shell veneer (MicroVeneer) laminated (or
encased) in an organic polymer resin to a particular thickness. This
product is perfect for applications were strips of the
Lamalone® are
cut, repeated heated (in 150 degree water) and bent to form a radius curve or a
full circle (ring). It is very often used on Fishing Rods, Pool Cues and other
applications were the veneer needs to be "wrapped" around a cylinder or cone
shaped object or bent to match a given radius. Lamalone®
is a "Finished" product that is ready to cut, inlay, sand and polish.
How is Lamalone®
different then Aba lam or other
Shell "Lam" products?
a. Lamalone is up to 150% cheaper then the other
shell Lams products
1. Green Abalone Aba lam in the (5"x9") in 0.05" thickness is
over $130 plus shipping!!!
b. Lamalone's veneer sheet is "floated" in its
laminate
1. "Floating" the veneer (30% of lamination resin is on
bottom and 70% on top) which
allows the product to be heated
in hot water (150 degrees) and it can be easily
bent without the veneer
cracking to match a radius or even into a complete circle
(ring) for items like Fishing
Rods and Pool Cues. Because of this technique, InlayUSA
has been recently awarded a
U.S. Patent for this production method.
2. Most Shell "Lam" products are mounted on a fiberglass (with
fiber cloth) backing with
a urethane clear coat topping. Because of
this, they become very rigid within 15
days of being made and both the fiberglass
base and attached veneer can crack and
break during the bending process, but not
Lamalone which uses a custom formulated
organic polymer for encasement
Common Uses:
Inlaying, Mosaic, Marquetry, Design Embellishments, Jewelry, Arts & Crafts, Pin
Shipping, Fishing Rods & Lures, Construction, Tiles, Shower Doors, Instrument
Building (Luthiers), Woodworking, Pool Cues, Metalworking and 1000s of other uses
Add
tinting to your order!!!
Color
Tinted
MicroVeneers®
Color Tinted items are CUSTOM made and can NOT be
refunded or exchanged except for veneer defects
$5.00 per sheet
Overnight/Priority not
available on Color Tinted Items
Does NOT include shell veneer!
If ordering
several "Tinted" MicroVeneer Sheets
If ordering Color Tinting READ THIS!!!
If order several shell types and/or several "tint" colors
combinations, order the shell first and then the "tint" color and repeat for
each combination you need. To verify what shell goes with what "tint" color,
add the color "tint" information for each shells to the
"Comments" during checkout process or email us at
tint@inlayusa.com
and verify the combination you want. Order any un-tinted shells last so they
are at the end of the list in the shopping cart.
After the Shopping Cart appears verify the item and X out of the Shipping cart
unless you are done shopping and ready to complete the checkout process.
Blue
Green
Red Yellow
   
Purple Light
Blue Brown
Pink
  
Lime
Orange Black
White
Note:
Paua and Black-Lip MOP can
NOT be tinted Brown, Black or White. Green Heart
can NOT be tinted
Black or Brown but can be tinted Gold or White (making the Green Heart have a
purer white in the natural white (pearl) areas of the shell. If these colors
are order with these shell the tinting fee will be refunded but the order will
be shipped. As well, all these shells vary in darkness and the tint examples
are not exact. If you need to color match shell for your project we provide
tinting instructions with every order. Tinting Shell takes several days (drying
time) and can NOT be shipped using Overnight or 2nd Day USPS.
Seven Reasons to buy
InlayUSA's
Top-Strat®
1. Same product being used
by the most well known musical instrument companies
a. Our MicroVeneer
are the same as used on the most expensive guitars built worldwide!
2. NOT CHEAP FAKE PEARLoid BUT REAL "AAAA"
Grade WHOLE SHELL NACRE!!!
a. Made with the highest
quality Shell Nacres available using a process so unique we chose to protect it
by "SECRET" and
not by U.S. Patent that are worthless in stopping overseas companies from
stealing the process!!!
3. Same "Look and Feel" as full thickness
inlay blanks
a.
Experts can't tell the differences between our veneer and
full thickness inlay blanks once inlayed
4. MUCH safer to use and process then full thickness inlay
blanks
a. Processing full thickness
inlay blanks creates deadly dust particle
b. Working full thickness inlay blanks causes
cancer similar to that caused by asbestos
c. Processing full thickness inlay blanks is now
illegal in Non-EPA unregulated locations
d. Current full thickness shell blank
sellers are now required to report all purchases
5. Inlay without using an inlay cavity and save 90% on
your inlaying time!!!
a.
Inlay with either a very shallow cavity (0.20mm) or no cavity at all with a few
coats of clear
b. Won't have
to spend hours mixing custom wood fillers for the seam between inlay piece and
cavity
6. Cut your inlay pieces with x-acto
knifes or even sharp scissors!!!
a.
Do perfect LOGO and other small inlay pieces by using inexpensive CNC Machine or
Laser Cutting services
b. Even Inlay beginners can product
perfect inlays pieces at home for fun or profit
c. The average
inlay artist will have up to 30% of their inlay pieces break during cutting
d. Our product
can be cut narrow and with proper handle and cutting techniques average less
then 5% breakage
1. Using
CNC machine and Laser Cutting breakage is generally zero percent breakage!
7. Our MicroVeneers only cost 5 to 10% of the price of
full thickness shell "Blanks"
a. Full
thickness "Blanks" of the same quality as our MicroVeneer's can cost as much as
$25 per square inch
b. The
MicroVeneer shown on this listing with color tinting cost less then 85 cents per
square inch!!!
c. Our
MicroVeneer start at a cost as little as 60 cents per square inch
in single 3"x 5" sheets!!!
d. Wholesale prices are available
with no minimum purchase or product stocking requirements
e. Overseas (EU)
Dealers are wanted and can get a franchise with a total startup cost of under
$2500 USD
1.
Complete startup stock of MicroVeneers and a hosted website for one year
(renewal $150 per year)
a.
InlayUSA, Inlay International or Mop Supplier USA, Inc. will not compete against
you in your
country's market
b.
Only one franchise will be sold per EU country and you will have NO competitors
in your country.
FASTER,
SAFER,
CHEAPER and EASIER
with no loss of quality or appearance!!!
|
SPECIFICATIONS
Made in USA |
| Standard size: |
5" x 9" Total Area= 45 sq.
inches |
| Encasement Resin: |
Custom formulated organic
polymer |
| |
|
| Cutting and Fixing: |
Easily cut using Jeweler's saw, Standard
Shell "Blank" Cutting tools, router, HydroKnife and CNC machine. Lasers
Cutters are not recommended
Adhese (glue) to a range of surfaces with Superglues, general purpose
laminate adhesives, single or 2-part epoxy or White/Wood or Gorilla Glues |
WATER RESISTANCE
Resistant to cold and boiling water - suitable for use in bathrooms and
kitchens, cleaning instructions available on request.
TESTING
This product has been subjected to abrasion testing by independent
national testing authority under conditions for which it was intended. Results
available on request.
WARNING
Placed in direct sunlight shell products may fade. Not always suitable for use
as flooring material or bench tops subject to heavy use, or where hot items are
placed, without protective coating. Not suitable around areas with excessive
heat, e.g., fireplaces.
|
