View and/or Shop by clicking on Product
Pure Raw Shell Veneer (0.15mm thick)
and Clear Coat Gloss(0.20mm thick).
Also called Thin Lam
on a Composite
Back (0.05" thick). Standard block inlay
thickness.Unique Copyrighted Product.
can be made in any
thick in 0.15mm increments.
Polymer similar to Aba Lam and Shell LAMs
0.40", 0.05", 0.06", 0.08" & 0.1"
We will cut your whole 5"x9" Sheets for as low as $50 and
matching inlay cavities for $25
Grand Opening Special
Broken, chipped and defective items
Not all items can be shipped using Overnight or Express Mail
Oversea Buyer Must add this to their order
How to cut, shape, dye, glue and mount
and wrap our products
Commonly asked Questions
Scrip and etching our MicroVeneer
just like block shell
What can these Products can be used for
How to "Wrap" ourMicroVeneers onto
Fishing Rods and Pool Cues, etc
All the following terms are the sole
property of InlayUSA.com
Prince of Pearl
The Abby ofAwabi
The Sultan ofShell
The Mother of
Prince of Paua
The Mother of
The King Tut
is available in all the shell
types of our other shell products and in six (6) standard thicknesses (0.04",
0.05", 0.06", 0.08" and 0.1") They are available by custom order in 5"x9" panel sizes. Average shipping time is
7 to 10 business days
(processing and curing time).
For more information contact
with any questions you might have or call Toll Free 1-866-674-4257 (Mon-Fri 10am
To order or get more
information click on any shell type below.
Agoya Oyster Lamalone®
Aussie Abalone Lamalone®
Awabi Oyster Lamalone®
Black-Lip MOP Lamalone®
Donkey Abalone Lamalone®
Gold-Lip MOP Lamalone®
Green Abalone Lamalone®
Pacific Oyster Lamalone®
Silver-Lip MOP Lamalone®
Tahitian Light Lamalone®
Lamalone, Flexalone, NacreLite or any Color Tinted product are all custom made
products and are not returnable except in the case of Manufactor defects (more
then 25 visiable micro bubbles or under thickness are examples of a returnable
defect. Over thickness is not consider a defect but an update.
INCLUDE FREE SHIPPING TO U.S. ADDRESSES
ALL Overseas Buyers MUST ADD Shipping Options: International
a similar product to Aba Lam and Shell "Lams." That is, it is a sheet of shell
veneer (MicroVeneer) laminated (or encased) in an
organic polymer resin to a particular thickness. This product is perfect for
applications were strips of the Lamalone® are
cut, repeated heated (in 150 degree water) and bent to form a radius curve or a
full circle (ring). It is very often used on Fishing Rods, Pool Cues and other
applications were the veneer needs to be "wrapped" around a cylinder or cone
shaped object or bent to match a given radius.Lamalone®is
a "Finished" product that is ready to cut, inlay, sand and polish.
How is Lamalone®different
then Aba lam or
other Shell "Lam" products?
is up to 150% cheaper then the other shell Lams products
1. Green Abalone Aba lam in the (5"x9") in 0.05" thickness is over $130 plus
veneer sheet is "floated" in its laminate
1. "Floating" the veneer (30% of lamination resin is on bottom and 70% on
allows the product to be heated in hot water (150 degrees) and it can
bent without the veneer cracking to match a radius or even into a
(ring) for items like Fishing Rods and Pool Cues. Because of this
has been recently awarded a U.S. Patent for this production method.
2. Most Shell "Lam" products are mounted on a fiberglass (with fiber cloth)
a urethane clear coat topping. Because of this, they become very rigid
days of being made and both the fiberglass base and attached veneer can
break during the bending process, but not Lamalone which uses a custom
organic polymer for encasement
Inlaying, Mosaic, Marquetry, Design Embellishments, Jewelry, Arts & Crafts, Pin
Shipping, Fishing Rods & Lures, Construction, Tiles, Shower Doors, Instrument
Building (Luthiers), Woodworking, Pool Cues, Metalworking and 1000s of other
Satisfaction Guaranteed or your Money Back!!!
All Rights Reserved
MicroVeneer®,Micralone®, Top-Strat®,Lamalone®and Nacrelite®
are Registered and Copyrighted Trademarks of InlayUSA 1998-2010