|
View and/or Shop
by clicking on Product line below:
MicroVeneers®
Pure Raw Shell Veneer (0.15mm thick)
Micralone®
MicroVeneer®
with Opaque Backing and Clear Coat Gloss(0.20mm thick). Also called ThinLams
Top-Strat®
MicroVeneer®
mount on a Composite Back
(0.05" thick). Standard block inlay thickness.
Unique Copyrighted Product.
NacreLite®
MicroVeneer®
that can be made in any thick in 0.15mm increments.
Lamalone®
MicroVeneer®
embedded in Polyurethane (0.60" thick)
Scratch & Dent
Broken, chipped and defective items
Ship OverNight
Not all items can be shipped using Overnight
Ship Overseas
Oversea Buyer Must add this to their order
Instructions
How to cut, shape, dye, glue and mount and wrap our products
FAQ's
Commonly asked Questions
UnderLay by CNG©
Scrip and etching our
MicroVeneer©
just like block shell
Possible Uses
What can these Products can be used for
Wrapping
on
Fishing Rods
&
Pool Cues
How to "Wrap" our MicroVeneers©
onto Fishing Rods and Pool Cues, etc.
LuthiersInternational.org
Join FREE the larger list of searchable Luthiers in the
World!
Featured Artist
View the word of some of the Greatest Inlay Artist and Luthiers
in the World
Micralone® 3"x5"
Micralone®5"x9"
Agoya Oyster Micralone®
Aussie Abalone Micralone®
Awabi Abalone Micralone®
Black-Lip MOP Micralone®
Donkey Abalone Micralone®
Gold MOP Micralone®
Green Abalone Micralone®
Green Heart Abalone Micralone®
Green Sea Snail Micralone®
Pacific Oyster Micralone®
Paua Abalone Micralone®
Red Abalone Micralone®
Red Ripple Micralone®
Silver Lip MOP Micralone®
Tahitian Light Micralone®
All
the following terms are the sole property of InlayUSA.com :
to U.S.
King
Abalone™
Prince
of
Pearl™
The
Abby
of
Awabi™
The
Sultan
of
Shell™
The
Mother
of all
Pearl
™
Vicker
of
Veneer™
Prince
of
Paua™
The
Mother
of all
Inlay™
Queen
Awabi™
The
King
Tut of
Tahitian™
| |
Micralone®
[Micralone® 3"x5"]
[Micralone®5"x9"]
[Agoya Oyster Micralone®]
[Aussie Abalone Micralone®]
[Awabi Abalone Micralone®]
[Black-Lip MOP Micralone®]
[Donkey Abalone Micralone®]
[Gold MOP Micralone®]
[Green Abalone Micralone®]
[Green Heart Abalone Micralone®]
[Green Sea Snail Micralone®]
[Pacific Oyster Micralone®]
[Paua Abalone Micralone®]
[Red Abalone Micralone®]
[Red Ripple Micralone®]
[Silver Lip MOP Micralone®]
[Tahitian Light Micralone®]
Micralone®
is a product that is made from our MicroVeneer®
(a raw shell veneer) but has an opaque backing and a Polyurethane clear coat
(gloss) on the dress surface. Therefore,
Micralone®
is ready to cut and mount. However, Micralone®
can not be color tinted since it already has a clear coat on it.
Our Micralone® is an inlay artist
dream for guitar inlay, Auto Detailing and Pin striping, Knife Makers, Arts and
Crafts and Jewelry Making! It is so thin that you can bevel the edge on the
piece and inlay it without
a cavity!!! It has made from all natural shell and has no coating of any type
either on the top or bottom side. Because of this, the artist has twice the area
to pick from when selecting areas to inlay with. Once inlayed it
is impossible to tell our MicroVeneer® from natural blanks.
It is made from all natural shell and is about the same thickness as two sheets
of paper. It can be cut with sharp scissors or an x-acto knife and is perfect
for creating custom headstocks or a "Tree of life" fret board designed. It is
Flexible enough to be used for auto detailing and "Pin Striping." You can easily
cut custom logo or do nearly impossible "lettering" for
"Brand" names. Because of it's flexibly it is a dream for doing Purfling and
Binding without having to "break and miter" the pieces. You can made custom
rosettes without having to create an inlay cavity.
Inlay pieces can be cut in a fraction of the time (and money) that it takes with
standard inlay blanks and without ANY compromise in the quality of the finish
product!!!
Add Shipping Options:
International Orders
| SPECIFICATIONS |
| Standard size: |
3" x 5" or 5" x 9" x 0.20mm Thick. Total Area=15 or 45 square
inches |
| Backing: |
Opaque Enamel Backing |
| Finish: |
High Gloss (clear) Polyurethane |
| Cutting and Fixing: |
Easily cut using scissors, craft knife, Razor knife or
router, laser cutters for intricate designs or inlays. Fixed/glued to a
range of surfaces with general purpose laminate adhesives, Super Glues,
single or 2-part epoxy |
BEST USES:
1. Knife Handles
2. Guitar/Instrument Inlay
3. Purfling/Binding
4. Pin Striping
5. Rosettes
6. Fender Style "Curve " Fret board Inlay.
7. Jewelry Making
8. Furniture Inlay
9. And a 1000 and 1 other uses!!!
WATER RESISTANCE
Resistant to cold and boiling water - suitable for use in bathrooms and
kitchens, cleaning instructions available on request.
ACOUSTIC PROPERTIES
Test have shown that is far superior to natural blanks being used to
"Brake and Miter" for Purfling and Binding. As well, audio test have show that
MicroVeneer®, Micralone® and Top-Strat® have better acoustic properties then
did natural shell "Blanks"
TESTING
This product has been subjected to abrasion testing by
independent national testing authority under conditions for which it was
intended. Results available on request.
WARNING
Placed in direct sunlight shell products may fade. Not always suitable
for use as flooring material or bench tops subject to heavy use, or where hot
items are placed, without protective coating. Not suitable around areas with
excessive heat, e.g., fireplaces.
|
