MicroVeneer®

Our MicroVeneer®  is an inlay artist dream for guitar inlay, Auto Detailing and Pin striping, Knife Makers, Arts and Crafts and Jewelry Making! It is so thin that you can bevel the edge on the piece and inlay it without
a cavity!!! It has made from all natural shell and has no coating of any type either on the top or bottom side. Because of this, the artist has twice the area to pick from when selecting areas to inlay with. Once inlayed it
is impossible to tell our MicroVeneer
®  from natural blanks.  It is made from all natural shell  and is about the same thickness as two sheets of paper.  It can be cut with sharp scissors or an x-acto knife and is perfect
for creating custom headstocks or a "Tree of life" fret board designed. It is Flexible enough to be used for auto detailing and "Pin Striping." You can easily cut custom logo or do nearly impossible "lettering" for
"Brand" names. Because of it's flexibly it is a dream for doing Purfling and Binding without having to "break and miter" the pieces. You can made custom rosettes without having to create an inlay cavity.
Inlay pieces can be cut in a fraction of the time (and money) that it takes with standard inlay blanks and without ANY compromise in the quality of the finish product!!!
 


   Add Shipping Options:
   International Orders

SPECIFICATIONS
Standard size: 3 inches x 5 inches x 0.15mm Thick. Total Area=15 sq. inches
Backing: None
Finish: None, Can be color tinted.
Cutting and Fixing: Easily cut using scissors, craft knife, Razor knife or router, laser cutters for intricate designs or inlays. Fixed/glued to a range of surfaces with general purpose laminate adhesives, Super Glues, single or 2-part epoxy

BEST USES:
1. Knife Handles
2. Guitar/Instrument Inlay
3. Purfling/Binding
4. Pin Striping
5. Rosettes
6. Fender Style "Curve " Fret board Inlay.
7. Jewelry Making
8. Furniture Inlay


WATER RESISTANCE

Resistant to cold and boiling water - suitable for use in bathrooms and kitchens, cleaning instructions available on request.

ACOUSTIC PROPERTIES
Test have shown that is far superior to natural blanks being  used to "Brake and Miter" for Purfling and Binding. As well, audio test have show that MicroVeneer®, Micralone®  and Top-Strat®   have better acoustic properties then did natural shell "Blanks"

TESTING
This product has been subjected to abrasion testing by independent national testing authority under conditions for which it was intended. Results available on request.

WARNING
Placed in direct sunlight shell products may fade. Not always suitable for use as flooring material or bench tops subject to heavy use, or where hot items are placed, without protective coating. Not suitable around areas with excessive heat, e.g., fireplaces.

HOME

   Satisfaction Guaranteed or your Money Back!!!

©InlayUSA.com 1998-2007
All Rights Reserved

All Prices in U.S. Dollars ONLY. Prices subject to change without notice. Copyright InlayUSA 1998-2010