|
View and/or Shop
by clicking on Product line below:
MicroVeneers®
Pure Raw Shell Veneer (0.15mm thick)
Micralone®
MicroVeneer®
with Opaque Backing and Clear Coat Gloss(0.20mm thick). Also called ThinLams
Top-Strat®
MicroVeneer®
mount on a Composite Back
(0.05" thick). Standard block inlay thickness.
Unique Copyrighted Product.
NacreLite®
MicroVeneer®
that can be made in any thick in 0.15mm increments.
Lamalone®
MicroVeneer®
embedded in Polyurethane (0.60" thick)
Scratch & Dent
Broken, chipped and defective items
Ship OverNight
Not all items can be shipped using Overnight
Ship Overseas
Oversea Buyer Must add this to their order
Instructions
How to cut, shape, dye, glue and mount and wrap our products
FAQ's
Commonly asked Questions
UnderLay by CNG©
Scrip and etching our
MicroVeneer©
just like block shell
Possible Uses
What can these Products can be used for
Wrapping
on
Fishing Rods
&
Pool Cues
How to "Wrap" our MicroVeneers©
onto Fishing Rods and Pool Cues, etc.
LuthiersInternational.org
Join FREE the larger list of searchable Luthiers in the
World!
Featured Artist
View the word of some of the Greatest Inlay Artist and Luthiers
in the World
Veneers by the INCH
Veneer 3"x5"
Veneer 5"x9"
Agoya MicroVeneer®
Aussie Abaone MicroVeneer®
Awabi Oyster MicroVeneer®
Black-Lip MOP MicroVeneer®
Donkey Abalone MicroVeneer®
Gold Lip MOP MicroVeneer®
Green Abalone MicroVeneer®
Green Heart Abalone MicroVeneer®
Green Sea Snail MicroVeneer®
Pacific Oyster MicroVeneer®
Paua Abalone MicroVeneer®
Red Abalone MicroVeneer®
Red Ripple Abalone MicroVeneer®
Silver-Lip MOP MicroVeneer®
Tahitian Light MicroVeneer®
All
the following terms are the sole property of InlayUSA.com :
to U.S.
King
Abalone™
Prince
of
Pearl™
The
Abby
of
Awabi™
The
Sultan
of
Shell™
The
Mother
of all
Pearl
™
Vicker
of
Veneer™
Prince
of
Paua™
The
Mother
of all
Inlay™
Queen
Awabi™
The
King
Tut of
Tahitian™
| |
MicroVeneer ®
[Veneers by the INCH]
[Veneer 3"x5"]
[Veneer 5"x9"]
[Agoya MicroVeneer®]
[Aussie Abaone MicroVeneer®]
[Awabi Oyster MicroVeneer®]
[Black-Lip MOP MicroVeneer®]
[Donkey Abalone MicroVeneer®]
[Gold Lip MOP MicroVeneer®]
[Green Abalone MicroVeneer®]
[Green Heart Abalone MicroVeneer®]
[Green Sea Snail MicroVeneer®]
[Pacific Oyster MicroVeneer®]
[Paua Abalone MicroVeneer®]
[Red Abalone MicroVeneer®]
[Red Ripple Abalone MicroVeneer®]
[Silver-Lip MOP MicroVeneer®]
[Tahitian Light MicroVeneer®]
Our MicroVeneer® is an inlay artist
dream for guitar inlay, Auto Detailing and Pin striping, Knife Makers, Arts and
Crafts and Jewelry Making! It is so thin that you can bevel the edge on the
piece and inlay it without
a cavity!!! It has made from all natural shell and has no coating of any type
either on the top or bottom side. Because of this, the artist has twice the area
to pick from when selecting areas to inlay with. Once inlayed it
is impossible to tell our MicroVeneer® from natural blanks.
It is made from all natural shell and is about the same thickness as two sheets
of paper. It can be cut with sharp scissors or an x-acto knife and is perfect
for creating custom headstocks or a "Tree of life" fret board designed. It is
Flexible enough to be used for auto detailing and "Pin Striping." You can easily
cut custom logo or do nearly impossible "lettering" for
"Brand" names. Because of it's flexibly it is a dream for doing Purfling and
Binding without having to "break and miter" the pieces. You can made custom
rosettes without having to create an inlay cavity.
Inlay pieces can be cut in a fraction of the time (and money) that it takes with
standard inlay blanks and without ANY compromise in the quality of the finish
product!!!
Add Shipping Options:
International Orders
| SPECIFICATIONS |
| Standard size: |
3 inches x 5 inches x 0.15mm Thick. Total Area=15 sq.
inches |
| Backing: |
None |
| Finish: |
None, Can be color tinted. |
| Cutting and Fixing: |
Easily cut using scissors, craft knife, Razor knife or
router, laser cutters for intricate designs or inlays. Fixed/glued to a
range of surfaces with general purpose laminate adhesives, Super Glues,
single or 2-part epoxy |
BEST USES:
1. Knife Handles
2. Guitar/Instrument Inlay
3. Purfling/Binding
4. Pin Striping
5. Rosettes
6. Fender Style "Curve " Fret board Inlay.
7. Jewelry Making
8. Furniture Inlay
Seven Reasons to buy
InlayUSA's
MicroVeneer®
1. Same product
being used by the most well known musical instrument companies
a. Our
MicroVeneer are the same as used on the most expensive guitars built worldwide!
2. NOT CHEAP
FAKE PEARLoid BUT REAL "AAAA" Grade WHOLE SHELL NACRE!!!
a.
Made with the highest quality Shell Nacres available using a process so unique
we chose to protect it by "SECRET" and not by U.S. Patent that are worthless in
stopping overseas companies from stealing the process!!!
3. Same "Look and Feel" as full thickness
inlay blanks
a.
Experts can't tell the differences between our veneer and
full thickness inlay blanks once inlayed
4. MUCH safer to use and process then full thickness inlay
blanks
a. Processing full thickness
inlay blanks creates deadly dust particle
b. Working full thickness inlay blanks causes
cancer similar to that caused by asbestos
c. Processing full thickness inlay blanks is now
illegal in Non-EPA unregulated locations
d. Current full thickness shell blank
sellers are now required to report all purchases
5. Inlay without using an inlay cavity and save 90% on
your inlaying time!!!
a.
Inlay with either a very shallow cavity (0.20mm) or no cavity at all with a few
coats of clear
b. Won't have
to spend hours mixing custom wood fillers for the seam between inlay piece and
cavity
6. Cut your inlay pieces with x-acto
knifes or even sharp scissors!!!
a.
Do perfect LOGO and other small inlay pieces by using inexpensive CNC Machine or
Laser Cutting services
b. Even Inlay
beginners can product perfect inlays pieces at home for fun or profit
c. The average
inlay artist will have up to 30% of their inlay pieces break during cutting
d. Our product
can be cut narrow and with proper handle and cutting techniques average less
then 5% breakage
1. Using
CNC machine and Laser Cutting breakage is generally zero percent breakage!
7. Our MicroVeneers only cost 5 to 10% of the price of
full thickness shell "Blanks"
a. Full
thickness "Blanks" of the same quality as our MicroVeneer's can cost as much as
$25 per square inch
b. The
MicroVeneer shown on this listing with color tinting cost less then 85 cents per
square inch!!!
c. Our
MicroVeneer start at a cost as little as 60 cents per square inch
in single 3"x 5" sheets!!!
d. Wholesale prices are available
with no minimum purchase or product stocking requirements
e. Overseas (EU)
Dealers are wanted and can get a franchise with a total startup cost of under
$2500 USD
1.
Complete startup stock of MicroVeneers and a hosted website for one year
(renewal $150 per year)
a.
InlayUSA, Inlay International or Mop Supplier USA, Inc. will not compete against
you in your
country's market
b.
Only one franchise will be sold per EU country and you will have NO competitors
in your country.
FASTER,
SAFER,
CHEAPER and EASIER
with no loss of quality or appearance!!!
WATER RESISTANCE
Resistant to cold and boiling water - suitable for use in bathrooms and
kitchens, cleaning instructions available on request.
ACOUSTIC PROPERTIES
Test have shown that is far superior to natural blanks being used to
"Brake and Miter" for Purfling and Binding. As well, audio test have show that
MicroVeneer®, Micralone® and Top-Strat® have better acoustic properties then
did natural shell "Blanks"
TESTING
This product has been subjected to abrasion testing by
independent national testing authority under conditions for which it was
intended. Results available on request.
WARNING
Placed in direct sunlight shell products may fade. Not always suitable
for use as flooring material or bench tops subject to heavy use, or where hot
items are placed, without protective coating. Not suitable around areas with
excessive heat, e.g., fireplaces.
All
the following terms are the sole property of
InlayUSA.com :
to U.S.
King
Abalone™
Prince
of
Pearl™
The
Abby
of
Awabi™
The
Sultan
of
Shell™
The
Mother
of all
Pearl
™
Vicker
of
Veneer™
Prince
of
Paua™
The
Mother
of all
Inlay™
Queen
Awabi™
The
King
Tut of
Tahitian™
|
