Toll Free Product Support 1-866-674-4257 Monday- Friday 10am to 8pm (EST)
 
Guaranteed Lowest Inlay Supplies in USA
 Home ] MicroVeneers® ] Micralone® ] [ Top-Strat® ] Lamalone® ] Nacralite® ] Laser Cutting Services ] Scratch & Dent ] OverNight/Express Shipping ] Ship Overseas Fees ] Instructions ] FAQ's ] UnderLay® by CNG ] Veneer Uses ] Wrap on Rods & Cues ] Abalone Facts ] New Page 10 ]
 

View and/or Shop by clicking on Product line below:

MicroVeneers®
Pure Raw Shell Veneer (0.15mm thick)

Laser Cutting
Services

We will cut your whole 5"x9" Sheets for as low as $50 and matching inlay cavities for $25
Grand Opening  Special

Micralone®
MicroVeneer® with Opaque Backing
and Clear Coat Gloss(0.20mm thick).
Also called ThinLams

Top-Strat®
MicroVeneer®  mount on a Composite
Back (0.05" thick). Standard block inlay
 thickness.Unique Copyrighted Product.

NacreLite®
MicroVeneer®  that can be made in any
 thick in 0.15mm increments.


Lamalone®
MicroVeneer® embedded in Organic
Polymer similar to  Aba Lam and Shell LAMs
Available thicknesses:
0.40", 0.05", 0.06", 0.08" & 0.1"


Laser Cutting
Services

We will cut your whole 5"x9" Sheets for as low as $50 and matching inlay cavities for $25
Grand Opening Special
Scratch & Dent
Broken, chipped and defective items

Shipping Options
Not all items can be shipped using Overnight or Express Mail

Ship Overseas
Oversea Buyer Must add this to their order

Instructions
How to cut, shape, dye, glue and mount
and wrap our products

FAQ's
Commonly asked Questions

UnderLay by CNG©
Scrip and etching our 
MicroVeneer©
just like block shell

Possible Uses
What can these Products can be used for

Wrapping on Fishing Rods & Pool Cues
How to "Wrap" our MicroVeneers
© onto
Fishing Rods and Pool Cues, etc

Laser Cutting
Services

We will cut your whole 5"x9" Sheets for as low as $50 and matching inlay cavities for $25
Grand Opening Special

Agoya Oyster Top-Strat®
Aussie Abalone Top-Strat®
Awabi Oyster Top-Strat®
Black-Lip MOP Top-Strat®
Donkey Abalone
Gold-Lip MOP Top-Strat®
Green Abalone Top-Strat®
Green Heart Top-Strat®
Green Sea Snail Top-Strat®
Pacific Oyster Top-Strat®
Paua Abalone Top-Strat
Red Abalone Top-Strat®
Red Ripple Top-Strat®
Silver-Lip MOPTop-Strat®
Tahitian Light Top-Strat®

 

All the following terms are the sole property of InlayUSA.com
 

 King Abalone
Prince of Pearl
The Abby of Awabi

The Sultan of Shell

The Mother of all Pearl
Vicker of Veneer
Prince of Paua
The Mother of all Inlay
Queen Awabi
The King Tut of Tahitian

 

Top-Strat®
Agoya Oyster Top-Strat®
Aussie Abalone Top-Strat®
Awabi Oyster Top-Strat®
Black-Lip MOP Top-Strat®
Donkey Abalone
Gold-Lip MOP Top-Strat®
Green Abalone Top-Strat®
Green Heart Top-Strat®
Green Sea Snail Top-Strat®
Pacific Oyster Top-Strat®
Paua Abalone Top-Strat
Red Abalone Top-Strat®
Red Ripple Top-Strat®
Silver-Lip MOPTop-Strat®
Tahitian Light Top-Strat®

Our Top-Strat© are an inlay artist dream for guitar inlay, Auto Detailing, Knife Makers, Arts and Crafts and Jewelry Making! These newly introduced panels are the State-of-the-Art, in Shell Lamination products. Unlike other laminated shell products, Top-Strat® shell is not embedded in a clear epoxy resin but is pressed to the  top surface of a Composite substrate. Because of this the "dress" surface is all natural shell with no coating of any type. It has the exact "Look and Feel" of a natural blank, without the drawbacks- It is much safer to cut and work (abalone dust is deadly), No Slag, No wormholes, No Dimples, it is "Flat" and inlay ready (.05" thick) and there is no worry of Breakage during cutting! It is perfect for expert and beginner inlay artist alike.  Never again spend hours cutting a blank to shape only to have it break at a weak spot. Because of it super strong, composition backing (substrate) pattern details can be cut much thinner then with regular blanks.  Once mounted into it inlay cavity it is impossible to tell the inlay is not made from an all-natural, hand-ground inlay blank. It is easily cut and worked with common inlay tools. This product is so unique that it even has it own U.S. Patent!

 

Add Shipping Options:
International Orders

SPECIFICATIONS
Standard size: 3 inches x 5inches x .05" Thick Total Area=15 sq. inches
Backing: Composite 
Finish: NONE. Can be color tinted.
Cutting and Fixing: Easily cut using a fine tooth fret saw or diamond blade.
Fixed/glued with general purpose adhesives

BEST USES:
1. Knife Handles
2. Guitar/Instrument Inlay
3. Fret marker(s)
4. Furniture Inlay

WATER RESISTANCE
Resistant to cold and boiling water - suitable for use in bathrooms and kitchens, cleaning instructions available on request.

ACOUSTIC PROPERTIES
Test have shown that Lamalone
© is far superior to natural blanks being  used to "Brake and Miter" for purfling and binding. As well, audio test have show that Lamalone©, Micralone© and Top-Strat©  have better acoustic properties then did natural shell "Blanks"

TESTING
This product has been subjected to abrasion testing by independent national testing authority under conditions for which it was intended. Results available on request.

WARNING
Placed in direct sunlight shell products may fade. Not always suitable for use as flooring material or bench tops subject to heavy use, or where hot items are placed, without protective coating. Not suitable around areas with excessive heat, e.g., fireplaces.

 CAUTION
This product is not as dangerous as natural shell (which is deadly!). As with all dust, proper protection should be used to avoid breathing the dust produced during processing of these products.

©InlayUSA 1998-2009
All Rights Reserved

MicroVeneer
®, Micralone®Top-Strat®, Lamalone® and Nacrelite®
are Registered and Copyrighted Trademarks of InlayUSA 1998-2010